Low Voltage Power Cable

Insulation: PVC or XLPE

Structure:

1.non armoured low voltage power cable

2. steel tape armoured low voltage power cable

3. steel wire armoured low voltage power cable

PVC Insulation Rated voltage 1KV(1.2KV) and 3KV(3.6KV) PVC insulated Flame retardant and Fire resistant power cables

Product standard

PVC insulated Flame retardant and Fire resistant Power cables are fixed laid in the circuit with frequency 50HZ and voltage to 3.6/6KV.

We can produce Flame retardant and Fire resistant power cables according to standard GB/T19666,Grade A,B,C or D.

Rated Voltage 0.6/1KV and 3.6/6KV.

Conductor of cables can be Copper and Aluminum.

The cables can be single core, two cores, three cores, four cores,(include three main cores and neutral) five cores(include three main cores and two neutral ;four. main cores and one neutral). The cables can be with armor and without armor.

We can produce cables with PVC outer sheath, Flame retardant PVC outer sheath or with fire resistant insulation. The cables are produced according to GB/T12706(eqv IEC60502) and GB/T18380-2001(eqv IEC60332) or GB/T19216(eqv IEC60331) and or the BS, DIN, or other international standards. And we also design and produce cables according to the requirement of our clients.

Application：

1.Long term working temperature is to 70℃.

2.The highest conductor temperature is not more than 160℃(lasting time not over 5 seconds)

3.Laying temperature not less than 0℃and the drop height is our of consideration.

4.The cable with chemical stability, anti acid, anti alkali, anti oil, anti organic solvent, not easy to be burning.

5.Easy for installation, easy bending and light.

6.Bending ratio as follow

Cable type and name

Normal cross section of the conducting core (mm²)

(1)（Main core）

1/1.5/2.5/4/6/10/25/35/50/70/95/120/150/185/240/300/400/500/630

(2) 3+1（Neutral core）

1.5/2.5/4/6/10/16/25/35/50/70/95/120/150/240/300

(3) 3+2（Neutral core）

1.5/2.5/4/6/10/16/25/35/50/70/95/120/150/240/300

XLPE Insulation Rated voltage 1KV(1.2KV) and 3KV(3.6KV) XLPE insulated Flame retardant and Fire resistant power cables

Product standard

XLPE insulated Flame retardant and Fire resistant Power cables are fixed laid in the circuit with frequency 50Hz and voltage up to 3.6/6KV.

We can produce Flame retardant and Fire resistant power cables according to standard GB/T19666-2002, Grade A,B,C or D.

Rated voltage 0.6/1KV and 3.6/6KV.

Conductor of cables can be Copper and Aluminum.

The cables can be single core, two cores ,three cores, four cores(include three main cores and one neutral),five cores(include three main cores and one neutral and one earthing core; Four main cores and one neutral).The cables can be with armor and without armor.

We can produce cables with PVC outer sheath., flame retardant PVC outer sheath or with fire resistant insulation. The cables are produced according to GB/T12706(eqv IEC 60502) and GB/T18380-2001(eqv IEC60332) or GB/T19216(eqv IEC60331) and or the BS, DIN or other international standards. And we also design and produce cables according to the requirement of our clients.

Application characteristics：

1. Long term working temperature is up to 90℃.

2. The highest conductor temperature is not more than 250℃.(lasting time not over 5 seconds.)

3. Laying temperature not less than 0℃ and the drop height is out of consideration.

4. The cable with chemical stability, anti acid, anti alkali, and oil, anti organic solvent, not easy to be burning.

5. Easy for installation, easy beading and light.

6.Bending ratio as follow

Cable type, name and application

If you have any need, please share the following information:

insulation material: PVC or XLPE

core number

cross section

with armoure or not, steel tape armoured or steel wire armoured